Publications and Presentations, Dr. Ali Abolmaali
| SELECTED REFEREED JOURNAL PUBLICATIONS 1. Le, T., Abolmaali, A., Motahari, S. A., Yeih, W., and Fernandez, R. (2007). “Finite Element-Based Analyses of Natural Frequencies of Long Tapered Hollow Steel Poles,” The Journal of Constructional Steel Research, In press. 2. Razavi, H., Abolmaali, A., and Ghassemieh, M. (2007). “A Weighted Residual Parabolic Acceleration Time Integration Method for Problems in Structural Dynamics,” The Journal of Computational Methods in Applied Mathematics, Vol. 7, No. 2, pp. 227-238. 3. Abolmaali, A., and Garg, A. K. (2007). “Effect of Wheel Live Load on Shear Behavior of Precast Reinforced Concrete Box Culverts,” The ASCE Journal of Bridge Engineering, In Press. 4. Motahari, S. A., Ghassemieh, M., and Abolmaali, A. (2007). “Implementation of Shape Memory Alloy Dampers for Passive Control of Structures Subjected to Seismic Excitations,” The Journal of Constructional Steel Research, Vol. 29, No.7, pp. 945-968. 5. Schachar R., Pierscionek B., and Abolmaali A., Le, T. (2007). “The relationship between accommodative amplitude and the ratio of central lens thickness to its equatorial diameter in vertebrate eyes,” The British Journal of Ophthalmology, Vol. 91, No. 6, pp. 812-817. 6. Abolmaali, A., Schachar, R., and Le, T. (2007). “Sensitivity Study of Human Crystalline Lens Accommodation,” The Journal of Computer Methods and Programs in Biomedicine, Vol. 85, No. 1, pp. 77-90. 7. Razavi, H., Abolmaali, A., and Ghassemieh, M. (2006). “Invisible Elastic Bolt Model Concept for Finite Element Analysis of Bolted Connections,” The Journal of Constructional Steel Research, Vol. 63, No. 5, pp. 647-657. 8. Schachar, R., Abolmaali, A. and Le, T. (2006). “Insight into the Etiology of the Age-Related Decline Amplitude of Accommodation of Human Lens Using a Nonlinear Finite Element Model of the Accommodating Human Lens,” The British Journal of Ophthalmology, Vol. 90, pp. 1304-1309. 9. Schachar, R., Abolmaali, A., and Kamangar F. (2006). Comment on the publication "Three-dimensional ultrasound, biomicroscopy environmental and conventional scanning electron microscopy investigations of the human zonula ciliaris for numerical modeling of accommodation” by O. Stachs et al., Graefe's Archive for Clinical and Experimental Ophthalmology, Vol. 244, No. 8, pp. 1062-1063. 10. Choi, Y., Abolmaali, A., Jung, J., and Jong, Su. (2006). “Development of Experimental Test Set Up to Evaluate Abrasion Characteristics of Drainage Pipes,” The ASCE Journal of Irrigation and Drainage Engineering, In Press. 11. Garg, A. K., and Abolmaali, A. (2006). “Experimental Investigation of Shear Capacity of Pre-cast Reinforced Concrete Box Culverts,” The ASCE Journal of Bridge Engineering, In Press. 12. Jung, J., Abolmaali, A., and Choi, Y. (2006). “Finite Element Analysis of Tapered Steel and Fiber Reinforced Plastic Bridge Camera Poles,” The ASCE Journal of Bridge Engineering, Vol. 11, No. 5, pp. 611-617. 13. Schachar, R.A., and Abolmaali A. (2006). “Proper Material Properties are Required for the Finite Element Model, Letter to the Editor,” The Archives of Ophthalmology Journal, Vol. 124, No. 7, pp. 1064-1065. 14. Abolmaali, A., Matthys, J.H., Farooqi, M., and Choi, Y. (2005). “Development of Moment-Rotation Model Equations for Flush End-Plate Connections,” The Journal of Constructional Steel Research, Vol. 61, pp. 1595-1612. 15. Abolmaali, A., Treadway, J., Aswath, P., Lu, F., and McCarthy, E. (2005). “Hysteresis Behavior of T-Stub Connections with Super-elastic Shape Memory Fasteners,” The Journal of Constructional Steel Research, Vol. 62, No. 8, pp. 831-838. 16. Abolmaali, A., Kukreti, A. R., and Razavi, S. H. (2003). “Hysteresis Behavior of Semi-Rigid Double Web Angle Steel Connections,” The Journal of Constructional Steel Research, Vol. 59, pp. 1057-1082. 17. Kukreti, A. R., and Abolmaali, A. (1999). “Moment-Rotation Hysteresis Behavior of Top and Seat Angle Steel Frame Connections,” The ASCE Journal of Structural Engineering, Vol. 125, No. 8, pp. 810-820. 18. Kukreti, A.R., Murray, T.M., and Abolmaali, A. (1987). “End-Plate Connection Moment-Rotation Relationship,” The Journal of Constructional Steel Research, Vol. 8, pp. 137-157. REFEEED CONFERENCE PROCEEDINGS 1. Abolmaali, A. and Najafi, M. (2007). “Non-linear Finite Element Modeling and Analysis of Pipe-Soil Interaction,” Proceedings of the 86th Annual Meeting of the Transportation Research Board, on CD Rom. 2. Abolmaali, A. and Kararam, A. (2007). “Non Finite Element-Based Investigation of the Effect of Bedding Thickness on Underground Pipe,” Proceedings of the 86th Annual Meeting of the Transportation Research Board, on CD Rom. 3. Abolmaali, A. and Garg, A. (2007). “Failure Mode for Precast Concrete Box Culverts Subjected to Wheel Live Load,” Proceedings of the 86th Annual Meeting of the Transportation Research Board, on CD Rom. 4. Garg, Anil K. and Abolmaali, A. (2006). "Shear Behavior of Small Span Single and Double Pre-cast Reinforced Concrete Box Culverts," Proceedings of the ASCE Pipeline Division Specialty Conference, “Pipelines 2006 Service to the Owner”, Chicago, Illinois, on CD Rom. 5. Sukhvarsh, J., Abolmaali, A., and Kettleson, P. (2005). "Influence of Aggregate Gradation on the Performance of Concrete Used in Highway Pavements," Journal of Transportation Research Board, under review. 6. Jung, J., and Abolmaali, A. (2005). “Finite Element Analysis of Tapered Fiber Reinforced Hollow Poles,” Proceedings of the 10th International Conference on Civil, Structural, and Environmental Engineering, Rome, Italy, on CD Rom. 7. Ghassemieh, M., Iranmanesh, A., and Abolmaali, A. (2005). “Finite Element Analysis of Framed Structures Using Shape Memory Alloy Braces Subjected To Cyclic Loadings,” The 2006 Annual Stability Conference, San Antonio, Texas, In Press. 8. Abolmaali, A., Razavi, H., and Godsell, Z. (2004). “Stability Analysis of Steel Frames With Partially Constrained Connections,” The 2004 Annual Stability Conference, Long Beach, CA, 2004, pp. 519-538. 9. Abolmaali, A., and Naveen, N. (2003). “Web-Enabled Interactive Modules to Display Finite Element Models in Structural Engineering Courses,” Proceedings of the American Society of Engineering Education (ASEE) Golf Southwest Conference, Annual Conference Held at the University of Texas at Arlington, March 19-21, on CD Rom. 10. Razavi, H., and Abolmaali, A. (2003). “A Dual Degree of Freedom Method for Problems in Contact Mechanics, Accepted for Publication in the Sixth International Conference on Computational Methods and Experimental Measurements in Contact Mechanics,” Greece. 11. Abolmaali, A., and Razavi, S. H. (2002). “Web-Based Finite-Element Mesh Generator for Testing Behavior of Steel Building Connections in Virtual Environment,” 22nd Computers and Information in Engineering Conference, Montreal, Canada. 12. Abolmaali, A., and Razavi, S. H. (2002). “Coupled Nonlinear Analysis of Frames with Double Web Angle Connections,” The Fourth International Conference on Computational Stochastic Mechanics” Sicily, Italy. 13. Razavi, S.H. and Abolmaali, A. (2002). “An Efficient Reformulation of Duhamel’s Integral to Reduce Execution Time,” 4th US National Congress of Theoretical and Applied Mechanics, PP 569 (Abstract), Blacksburg, VA. 14. Kukreti, A.R., and Abolmaali, A. (2000). “Dynamic Analysis of Steel Frames with Semi-Rigid Connections,” Proceedings of the XX Southeastern Conference on Developments in Theoretical Mechanics, College of Engineering, Auburn University, Auburn, Alabama, April 16-18, 16 pages. 15. Kukreti, A.R., and Abolmaali, A. (1998). “Moment-Rotation Hysteresis Models for Top and Seat Angle Semi-Rigid Connections,” Proceedings of the XIX Southeastern Conference on Developments in Theoretical Mechanics, Vol. XIX, College of Engineering, Florida Atlantic University, Boca Raton, Florida, May 3-5, pp. 235-245. 16. Kukreti, A.R., and Abolmaali, A., (1998). “Moment-Rotation Hysteresis Behavior of Semi-Rigid Steel Building Joints,” Proceedings of the International Symposium on Impact and Friction of Solids, Structures, and Intelligent Machines, Ottawa, Canada, June 27-30, pp. 39-42. OTHER PUBLICATIONS 1. Abolmaali, A. (2002). “Performance Evaluation of Light Transmitting Roof Panels,” Proceedings of the Texas Section ASCE Spring 2002 Meeting, Arlington, Texas, March 27-30, pp. 293-302. 2. Abolmaali, A., Kukreti, A.R., and Razavi, H. (2002). “Nonlinear Finite Element Analysis of Steel Frames With Semi-Rigid Joints,” the Proceedings of the Texas Section ASCE Spring 2002 Meeting, Arlington, Texas, March 27-30, pp. 283-292. 3. Abolmaali, A., Razavi, H. (2002). “Development of Finite Element Mesh Preprocessor for Virtual Experimentation of Steel Connections,” the Texas Section ASCE Spring 2002 Meeting, Arlington, Texas, March 27-30, pp. 303-312. 4. Farooqi, M., Razavi, H., and Abolmaali, A., (2002), “Finite Element Contact Algorithms for Problems in Structural Mechanics,” Proceedings of the Texas Section ASCE Fall 2002 Meeting, Waco, Texas, on CD Rom. 5. Abolmaali, A., Jareth, S. (2002). “Durability Evaluation of Dense Graded and Gap Graded Concrete Pavements,” the Proceedings of the Texas Section ASCE Spring 2002 Meeting, Arlington, Texas, March 27-30, pp. 261-270. RESEARCH PROJECT REPORTS 1. Abolmaali, A., Fernandez, R., Kamangar, F., Ramirez, G., and Le, T. (2006). “Vibration Reduction and Control for Traffic Cameras,” Report – FHWA/TX-06/0-5251-1, Department of Civil and Environmental Engineering, University of Texas at Arlington, October 31, 2006, 37 pages, Submitted to the Texas Department of Transportation, Austin, Texas 2. Abolmaali, A., Jung, J., and Ardekani, S. (2005). “Development of Design Criteria for CCTV Camera Poles,” Report – TXDOT/ST4/05, Department of Civil and Environmental Engineering, University of Texas at Arlington, August 31, 2005, 175 pages, Submitted to the Texas Department of Transportation, Austin, Texas. 3. Abolmaali, A., Matthys, J.H., Parmer, K., Cory, O., and Spray (2005). “Feasibility of Use of Bamboo as reinforcement in Concrete Beams,” Report – NSF/ST3/05, Department of Civil and Environmental Engineering, University of Texas at Arlington, September 5, 2005, 87 pages, Submitted to the National Science Foundation, Arlington, Virginia. 4. Abolmaali, A., Matthys, J.H., Chan, W., Nichols, R., and Seijo, F. (2005). “Experimental Investigation of Shear Capacity in Precast Box Culvert,” Report – NSF/ST2/05, Department of Civil and Environmental Engineering, University of Texas at Arlington, September 5, 2004, 63 pages, Submitted to the National Science Foundation, Arlington, Virginia. 5. Abolmaali, A., Matthys, J.H., and Shakya, R. (2004). “Water Damage Evaluation of Concrete,” Report – CCI/ST1/05, Department of Civil and Environmental Engineering, University of Texas at Arlington, August 15, 2005, 42 pages, Submitted to the International Chem-Crete, Richardson, Texas. 6. Abolmaali, A., Matthys, J.H., McCarthy, E., and Knight, C. (2004). “Ductility Evaluation of Shape Memory Alloys for the Use in Seismic Design of Structures,” Report – NSF/ST4/04, Department of Civil and Environmental Engineering, University of Texas at Arlington, August 1, 2004, 71 pages, Submitted to the National Science Foundation, Arlington, Virginia. 7. Abolmaali, A., Matthys, J.H., Garcia, A., and Wild, L. (2004). “Strength and Stiffness of Closed Circuit Television Camera Poles,” Report – NSF/ST3/04, Department of Civil and Environmental Engineering, University of Texas at Arlington, August 1, 2004, 53 pages, Submitted to the National Science Foundation, Arlington, Virginia. 8. Abolmaali, A., Matthys, J.H., and Holmes, J. (2004). “Analysis of Self Consolidating Concrete for Precast Structural Applications,” Report – NSF/ST2/04, Department of Civil and Environmental Engineering, University of Texas at Arlington, August 1, 2004, 76 pages, Submitted to the National Science Foundation, Arlington, Virginia. 9. Abolmaali, A., and Matthys, J.H., and Cueva, N. (2004). “Tracking of Remedial Methods for Foundation Failure in Expansive Soil- Phase II,” Report – NSF/ST1/04, Department of Civil and Environmental Engineering, University of Texas at Arlington, August 1, 2004, 62 pages, Submitted to the National Science Foundation, Arlington, Virginia. 10. Abolmaali, A., and Choi, Y. (2004). “Abrasion Characteristics of cellulose fiber reinforced cement and steel reinforced concrete Pipes,” Report – ACPA-04, Department of Civil and Environmental Engineering, University of Texas at Arlington, June 16 2004, 79 pages, Submitted to the American Concrete and Pipe Association, Dallas, Texas. 11. Abolmaali, A., Puppala, A., and Matthys, J.H. (2003). “Traditional and Novel Geotechnical Tests to Measure Strength and Deformation Characteristics of Soils,” Report – NSF/ST3/03, Department of Civil and Environmental Engineering, University of Texas at Arlington, October 21, 2004, 42 pages, Submitted to the National Science Foundation, Arlington, Virginia. 12. Abolmaali, A., and Matthys, J.H. (2003). “Tracking of Remedial Methods for Foundation Failure in Expansive Soil- Phase I,” Report – NSF/ST2/03, Department of Civil and Environmental Engineering, University of Texas at Arlington, October 21, 2004, 38 pages, Submitted to the National Science Foundation, Arlington, Virginia. 13. Abolmaali, A., and Matthys, J.H. (2003). “Experimental Investigation of Advanced Panel Structures Subjected to Uplift Pressure,” Report – NSF/ST1/03, Department of Civil and Environmental Engineering, University of Texas at Arlington, October 21, 2004, 81 pages, Submitted to the National Science Foundation, Arlington, Virginia. 14. Abolmaali, A., and Yuan, R.L. (2003). “Development of Design Criteria for CCTV Camera Poles,” Progress Project Report – TXDOT/ST/01, Department of Civil and Environmental Engineering, University of Texas at Arlington, July 2003, 122 pages, submitted to the Texas Department of Transportation. 15. Abolmaali, A., Johnston, G., and Jerath, S. (2003). “Performance Evaluation of Low Permeable Concrete Bridge Deck,” Report Project UND/CE-02-03, Department of Civil Engineering, University of North Dakota, June 2003, 75 pages, submitted to the North Dakota Department of Transportation, Bismarck, North Dakota. 16. Abolmaali, A., and Jerath, S. (2003). “Durability Evaluation of Artificially Aged Concrete,” Report Project UND/CE-01-03, Department of Civil Engineering, University of North Dakota, June 2003, 64 pages, submitted to the North Dakota Department of Transportation, Bismarck, North Dakota. 17. Abolmaali, A., and Watkins, C. (2001). “Performance Evaluation of Light Transmitting Panels,” Report Project UND/CE-01-99, Department of Civil Engineering, University of North Dakota, May 2001, 64 pages, submitted to the North Dakota Department of Transportation, Bismarck, North Dakota. 18. Abolmaali, A., and Jareth, S. (2001). “Durability Characteristics of Dense Graded Aggregates,” Report Project UND/CE-02-02, Department of Civil Engineering, University of North Dakota, May 2001, 73 pages, submitted to The North Dakota Department of Transportation, Bismarck, North Dakota. 19. Kukreti, A.R., Murray, T.M., and Abolmaali, A. (1984). “Finite Element Analysis of Two Tension Bolt Flush End-Plate Connections,” Project Report FSEL/MBMA 87-02, School of Civil Engineering and Environmental Science, University of Oklahoma, Norman, Oklahoma, July 1984, 233 pages, submitted to the Metal Building Manufacturers Association. PRESENTATIONS 1. Abolmaali, A. (2007). “UT Arlington Center for Structural Engineering Research,” Presentation made to Texas Industries, Inc., July 19, 2007. 2. Abolmaali, A. (2007). “Overview of the College of Engineering, UT Arlington,” Presentation made to the Mark Strand Waggoner Charitable Trust Bank of America, June 11, 2007. 3. Abolmaali, A. (2007). “UT Arlington Center for Structural Engineering Research,” Presentation made to the Mark Strand Waggoner Charitable Trust Bank of America, June 11, 2007. 4. Abolmaali, A. (2007). “UT Arlington Center for Structural Engineering Research,” Presentation made to the Concrete and Masonry-Related Association, May 31, 2007. 5. Abolmaali, A. (2007). “Hysteresis Behavior of Semi-Rigid Connections,” Presentation made to the ASCE-LRFD Meeting, Texas, May 17, 2007. 6. Abolmaali, A. (2007). “Experimental and Finite Element Investigations of Hanson AeroDwell Lightweight Concrete,” Presentation made to the International Code Council, Texas, May 15, 2007. 7. Abolmaali, A. (2007). “Experimental Investigation of AeroDwell Materials and Panels,” Presentation made to the International Code Council, Texas, May 12, 2007. 8. Abolmaali, A. (2007). “UT Arlington Center for Structural Engineering Research,” Presentation made to the 2007 Hanson Colloquium, May 14, 2007. 9. Abolmaali, A. (2007). “UT Arlington Center for Structural Engineering Research,” Presentation made to the American Concrete Pipe Association’s 99th Annual Convention, March 13, 2007. 10. Abolmaali, A. (2007). “UT Arlington Center for Structural Engineering Research,” Presentation made to the Ash Grove Cement Company, March 6, 2007. 11. Abolmaali, A. (2007). “Foam-Based Lightweight Concrete Precast Panels,” Presentation made to Hanson Pipe & Precast Products, Texas, January 19, 2007. 12. Abolmaali, A., Fernandez, R., Kamangar, F., Le, T. (2006) “Vibration and Control of Traffic Cameras,” Presentation made to the National Taiwan Ocean University, Taiwan, December 20, 2006. 13. Abolmaali, A. (2006). “Hurricane and Tornado Resistance Lightweight Precast Concrete Panels,” Presentation made to the National Ocean Taiwan University, Taiwan, December 20, 2006. 14. Abolmaali, A. (2006). “Non-linear Finite Element Model Human Accommodation Lens,” Presentation made to the National Taiwan Ocean University, Taiwan, December 20, 2006. 15. Abolmaali, A. (2006). “UT Arlington Center for Structural Engineering Research,” Presentation made to National Taiwan Ocean University, Taiwan, December 20, 2006. 16. Abolmaali, A. (2006). “Investigation of Shear Behavior in Precast Box Culverts,” Presentation made to the National Taiwan Ocean University, Taiwan, December 18, 2006. 17. Abolmaali, A., Akhi, K., Montes, F. (2006). “UT Arlington Center for Structural Engineering Research,” Presentation made to the Faculty and Students of Robert Lee Middle School, Grand Prairie, Texas, November 3, 2007. 18. Abolmaali, A. (2006). “UT Arlington Center for Structural Engineering Research,” Presentation made to the Mid-Cities Technical Club of Arlington, Arlington, Texas, October 4, 2006. 19. Abolmaali, A., Matthys, J. (2006). “Investigation of Shear Behavior in Concrete Box Culverts,” Presentation made to the American Concrete Pipe Association Technical Committee’s Annual Conference, Kansas, August 7, 2006 20. Abolmaali, A. (2005). “Investigation of Shear Behavior in Concrete Box Culverts,” Presentation made to the American Concrete Pipe Association Technical Committee’s Annual Conference, Santa Fe, New Mexico, August 4, 2005 21. Abolmaali, A. (2005). “Investigation of Shear Behavior in Concrete Box Culverts,” Presentation made to the AASHTO Rigid Culvert Liaison Committee’s Annual Conference, New Port, Rhode Island, June 28, 2005. 22. Abolmaali, A. (2005). “Center for Structural Engineering Research at UTA,” Presentation made to the American Concrete Pipe Association’s 97th Annual Convention, Las Vegas, Nevada, March 16, 2005. 23. Abolmaali, A., Razavi, H., and Godsell, Z. (2004). “Stability Analysis of Steel Frames with Semi-Rigid Connections,” Presentation made to the Structural Stability Research Council’s Annual Conference, Long Beach, California, April 27, 2004 24. Abolmaali, A., and Choi, Y. (2004). “Web-Based Nonlinear Analysis of Three Dimensional Frames with Flexible Connections,” Presentation made to the Korean Association for Shell and Spatial Structures, Annual Conference Held at Seoul, Korea, May 22, 2004. 25. Abolmaali, A., and Choi, Y. (2004). “Applications of Shape Memory Smart Materials in Seismic Design of Structural Systems,” Presentation made to the Architectural Institute of Korea, Annual Conference Held at Daegu, Korea, May 25, 2004. 26. Abolmaali, A., and Naveen, N. (2003). “Web-Enabled Interactive Modules to Display Finite Element Models in Structural Engineering Courses,” Presentation made to the American Society of Engineering Education (ASEE) Golf Southwest Conference, Annual Conference Held at the University of Texas at Arlington, March 19, 2003. 27. Abolmaali, A. (2003). “The Use of Shape Memory Alloys for Structural and Mechanical Connections,” Presentation made to Lockheed Martin Aircraft at The University of Texas at Arlington, July 17, 2003. 28. Abolmaali A. (2003). “Ductility Evaluation of Structural Connections Using Shape Memory Alloys,” Presentation made to the ASCE Structural Connection Committee during the Structure and Congress Symposium, in Seattle, Washington, March 2003. 29. Abolmaali, A. (2003). “The Use of Shape Memory Alloys for Structural and Mechanical Connections,” Presentation made to Vaught Aircraft at The University of Texas at Arlington July 2003. 30. Abolmaali, A., Shah, A., and Yuan, R.L. (2003). “Development of Design Criteria for CCTV Camera Poles,” Presentation made to the Texas Department of Transportation, Austin, Texas, May 15, 2003. 31. Abolmaali, A. (2002). “Performance Evaluation of Light Transmitting Roof Panels,” Proceedings of the Texas Section ASCE Spring 2002 Meeting, Arlington, Texas, March 27-30, pp. 293-302. 32. Abolmaali, A., Kukreti, A.R., and Razavi, H. (2002). “Nonlinear Finite Element Analysis of Steel Frames with Semi-Rigid Joints,” Presentation made to the Texas Section ASCE Spring 2002 Meeting, Arlington, Texas, March 27-30. 33. Abolmaali, A., Razavi, H. (2002). “Development of Finite Element Mesh Preprocessor for Virtual Experimentation of Steel Connections,” Presentation made to the Texas Section ASCE Spring 2002 Meeting, Arlington, Texas, March 27-30. 34. Farooqi, M., Razavi, H., and Abolmaali, A., (2002), “Finite Element Contact Algorithms for Problems in Structural Mechanics,” Presentation made to the Texas Section ASCE Fall 2002 Meeting, Waco, Texas, on CD Rom. 35. Abolmaali, A., Jareth, S. (2002). “Durability Evaluation of Dense Graded and Gap Graded Concrete Pavements,” Presentation made to the Texas Section ASCE Spring 2002 Meeting, Arlington, Texas, March 27-30, pp. 261-270. 36. Abolmaali, A., Jareth, S. (2001). “Durability Characteristics of Dense Graded Aggregates,” Presented to the North Dakota Department of Transportation, at the University of North Dakota, May 2001. 37. Abolmaali, A. (1997). “ Analysis of Steel Frames with Semi-Rigid Connections and Considering P-Delta Effects,” Presented at the 86th Annual Meeting of the Oklahoma Academy of Science, Chikashe, Oklahoma, November 7, 1997. 38. Abolmaali, A. (1997). “Coupled Nonlinear Finite Element Formulation of Semi-Rigid Frames,” Presented at American Concrete Institute local chapter, Oklahoma City, Oklahoma, October 16, 1997. |
