Given: The switch in the above circuit has been closed for a very long time. At t = 0, the switch is opened. The independent voltage source is a dc source.
Required: Determine the inductor current and capacitor voltage at t = 0 by analytical means. Using these values as initial conditions, run a transient analysis with PSpice for the circuit after the switch has been opened. Use 20 μs for the printing interval and for the maximum step size. Use 120 ms for the total time of simulation and set the no-print delay to zero. Use PROBE to print a trace of the inductor voltage and a trace of the capacitor voltage. Use the Tools|Label|Text menu command to label the print-out with your name, course and assignment number. Submit the graphical print-out and the circuit file print-out on the due date.