Materials Seminar Series – Spring 2008
 |
March 22nd, 2008
Campus-Wide Seminar
Nedderman Hall, Room 202
11:00 am
Dr. Bruce D. Terris |
Materials Seminar Series – Fall 2007
Woolf Hall 308; Friday 9:00 am – 10:50 am
September 7, 2007
9:00 am Policies and Procedures for Using the Characterization Center for Materials and Biology, C2MB
Dr. Jiechao Jiang, MSE/UT Arlington
10:00 am An Intermediate-layer Lithography Method for Micro/Nanofabrication and Corresponding Device Applications
Dr. Cheng Luo, MAE/September 14, 2007
9:00 am Tissue Engineering to Treat Cardiovascular Disease
Dr. Kytai Ngyuen, BE/UT Arlington
10:00 am Biodegradable Polymers for Soft Tissue Engineering
Dr. Jian Yang, BE/UT Arlington
September 21, 2007
Campus-Wide Seminar Nedderman Hall, Room 106
10:00 am Highly Epitaxial Ferroelectric Thin Films for Tunable Microwave Devices
Dr. Chonglin Chen, UT San Antonio, Department of Physics
September 28, 2007
9:00 am Giving a Successful Seminar
Dr. Roger Goolsby, UT Arlington/MSE
10:00 am Tribology of Materials in Engine Oils
Dr. Pranesh Aswath, UT Arlington/MSE
October 5, 2007
9:00 am Recent Progress in Ferromagnetic Nanoparticles
Dr. Ping Liu, UTA/Physics
10:00 am Nonlinear Creep in Polyethylene Nanocomposites
Dr. Nandika Dsouza, University of North Texas/MSE
October 12, 2007
Campus-Wide Seminar Nedderman Hall, Room 106
10:00 am Engineering of Carbon Nanotube Structures
Dr. Pulickel M. Ajayan, Rice University, Mechanical Engineering and Materials Science Department
Spring 2007 Colloquium Series
(NH 105, Friday, 11.00 – 12:00 AM unless announced differently)
May: Present and Future BEOL Integration Challenges
April 27: Magneto-electric Nanostructure and Spin-polarized Tunneling for
Solid-state Memory Devices
March 9: Sculpting Nanostructures and Their Mesoarchitectures for Applications
Feb. 23: Teaching Electrons New Tricks: Pure Spin Currents, Dr. Alex Hoffman, Materials Science Division, Center for Nanoscale Materials,
Argonne National Laboratory
Fall 2006 MSE Seminars
(WH 308, Friday, 9.00 – 10:50 AM unless announced differently)
Dec. 8:
The Outlook for Energy: A View to 2030, Dr. Adam D. Bratis, Technical Advisor, Corporate Planning, ExxonMobil
Nov. 3:
Stents and Current Practices of Interventional Cardiology, Dr. Emmanouil Brilakis, UT Southwestern Medical Center
Oct. 20:
Advanced Materials: Key to Next Generation Robots, Dr. Dan Popa, ARRI, UT Arlington
Magnetic Media for Storage Applications: University Technical Interactions, Dr. Frederico Sequeda, Univ. del Valle, Colombia
Oct. 13:
Low-temperature Syntheses of Oxide Semiconductors for Solar Photovoltaic Applications, Dr. Krishnan Rajeshwar, Chemistry UT Arlington
Nano-Engineered Coatings for Moving Mechanical Assemblies,
Dr. Thomas Scharf, Materials Science, University of North Texas
Oct. 6:
Innovations in Cellular and Molecular Imaging, Dr. Ralph Mason, UT Southwestern Medical Center
Sept. 29:
3D Surface Profiling for Plasticity Studies, Dr. Haiying Huang, MAE, UT Arlington
Research on Electronic Materials at UNT, Dr. Mohamed El Bouanani, Materials Science, University of North Texas
Sept. 22:
Exploration of Luminescence Nanoparticles for Cancer Detection and Treatment, Dr. Wei Chen, Physics, UT Arlington
Electrochemical Synthesis of Nanomaterials with Tunable Magnetic Properties: Nanowires and Porous Structures, Dr. Li Sun, Mechanical Engineering, University of Houston
Sept. 15:
Positron Annihilation Induced Auger Spectroscopy, Dr. Alex Weiss, Physics, UT Arlington
Biodegradable Elastomers for Tissue Engineering, Dr. Jian Yang, Bioengineering, UT Arlington
Sept. 11:
Recent Progress in Flexoelectric Studies, Dr. L. Eric Cross,
Evan Pugh Professor of Electrical Engineering Materials Research Institute, Pennsylvania State University |
